AM/FM/XM 6-CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Changer)

Type 2 AM/FM/XM 6-CD PLAYER WITH CD CHANGER CONTROL (Built-in CD Changer)

(1) Load button (LOAD) (2) Disc select buttons (1 to 6) (3) CD insertion slot
(4) CD eject button
(5) Disc button (CD/AUX) (6) Track up button/Fast forward button (7) Track down button/Rewind button (8) Repeat button (RPT)

Display

(A) Mode indicator
(B) Disc number
(C) Track number
(D) Play time
(E) CD indicator
(F) Repeat indicator

NOTE:
About Single CDs (8 cm CDs).

• Since the unit is not compatible with a single CD, do not load it into the unit.

• Keep in mind the fact that a single CD cannot be played even using a single CD adaptor for the unit.

• When a single CD is loaded into the unit accidentally, it will be ejected immediately.

Please be sure to remove it.

If you forcefully try to push it into the unit without removing it, the CD cannot be ejected. This will result in a damage to the mechanism. Please never do this.

Loading one CD

1) Press the load button (1), then press one of the disc select buttons (2) that corresponds to the slot into which you want to load a CD.

Both the indication “In” and the selected disc number in the CD indicator will blink for about 15 seconds.

2) Load the CD into the CD insertion slot (3). When the CD is loaded, play starts.

The disk number in the CD indicator will light.

CAUTION:
You can load a CD only while the indication “In” is blinking for about 15 seconds. During that period, the shutter located in the depth of the CD insertion slot (3) is opened. After 15 seconds time has elapsed, the indication “In” disappears from the display and the shutter closes, making it impossible to load a CD. If you try to load the CD with the shutter closed, the CD may damage the shutter.

Never do this.

Loading multiple CDs

1) Press the load button (1) for 2 seconds or longer.

The indication “CD ALL” appears in the display, and then the indication “In” and a disc number in the CD indicator will blink for about 15 seconds.

2) Load a CD into the CD insertion slot (3).

3) The indication “In” and the next disc number will blink in the display. Load the next CD.

4) After loading the required number of CD’s, press any disc select button (2) to select the desired CD to listen to. If no select button is pressed, play will start from the first loaded CD.

Only the numbers in the CD indicator that correspond to the loaded slots will light.

Ejecting one CD

1) Select the CD you want to remove with the disc select buttons (2).

2) Press the CD eject button (4).

If you leave the ejected CD without removing it, it will be drawn into the unit automatically after about 15 seconds.

(Auto reload function)

The buck up eject mechanism: This function allows you to eject the CD loaded in the unit with the unit turned off only by pressing the CD eject button (4).

Ejecting all the CDs

Press the CD eject button (4) for 2 seconds or longer. All the CDs will be ejected from the unit in a sequential manner.

• Please prepare a location where removed CDs can be stored.

• If you leave the ejected CD without removing it, it will be drawn into the unit automatically after about 15 seconds.

(Auto reload function)

The buck up eject mechanism: This function allows you to eject the CD loaded in the unit with the unit turned off only by pressing the CD eject button (4).

CAUTION:
If you try to push an ejected CD inside the unit forcibly before auto reloading, the disc surface might be scratched.

Listening to a CD

1) When a CD is inserted, it is automatically played back.

When a CD is already inside the unit, press the disc button (5) to play back the CD. When a CD is inside the unit, the CD indicator (A) is lit on the display unit.

2) If you want to play another CD, select it with the disc select buttons (2).

Play starts from the point on the disc that the unit played last (Last position memory).

Selecting a track

• Press the track up button (6) to listen to the next track.

• Press the track down button (7) twice to listen to the previous track.

When the track down button (7) is pressed once, the track being currently played will return to the beginning.

Fast forwarding/Rewinding a track

• Hold in the fast forward button (6) to advance a track rapidly.

• Hold in the rewind button (7) to rewind a track.

Repeat play

Press the repeat button (8).

Each time the button is pressed, repeat play mode changes as follows:

NOTE:
This operation should be performed within 2 seconds.

To cancel repeat play, press the repeat button (8) several times to change the repeat play mode to OFF.

• TRACK REPEAT.

The indication “TRACK RPT” appears in the display for 2 seconds and then the repeat indicator (F) lights.

The track currently being played is played repeatedly.

• DISC REPEAT.

The indication “DISC RPT” appears in the display for 2 seconds and then the repeat indicator (F) lights.

When all the tracks on the disc currently being played finish playing, play starts again at the beginning of the disc.